Technical Advice

Cracking

If you have cracks in your system it could be due to a number of reasons. This is something that can be prevented for every project.

Applying Resin Bound Sealer

This guide shows you how to make a sealer for resin surfacing using our Resin Bound Binders.

Mixing and Blend Issues

Mixing and blend issues can cause discolouration or an incorrect blend for the project.

Moisture Damage

Moisture damage exists when dew, frost, rain or snow comes into contact with the uncured resin binder.

Rust Spotting

The good news is that the rusting is fully treatable and does not have any effect on the strength or structural integrity of the system.

Shrinking

All thermosetting resins like polyurethanes will shrink upon curing- that means for resin bound it can shrink around the perimeter.

Edge Restraints

Edging or edge restraints are an important part of any surfacing project. They provide stability and containment of the new surface and base, to form a barrier from the surrounding landscaping.

Cleaning / Aftercare

Learn all about looking after your Resin Bound surface. Read our comprehensive guide on aftercare and cleaning advice.

Technical Bulletins

January 2024

Technical Bulletin - The Vuba Lab

Introducing Vuba’s Research and DevelopmentLab and our R & D Team.

February 2024

Technical Bulletin - SRM

Our SRM isn’t only used in our VubaMac system.It can also be used to improve the strengthof a standard Resin Bound Surfacing System.